After your Newport Beach, CA bathroom remodeling project, you are going to want to keep your space feeling fresh and new. Keeping this space fleeing like a spa isn’t difficult, it just requires some time and attention. One element you need to focus on is the tile. Keeping tile grime free and clean is crucial to the overall look and feel of this space. To learn how to clean your tile like a professional, keep reading.

1. Make the Cleaning Solution

The cleaning solution you use can depend on the material the tile is made from. For example, glass tiles can be cleaned with window cleaner while natural stone tiles should be cleaned with a solution made from warm water and dish soap.

While there are many bathroom tile cleaners on the market, if you want to make one yourself at home that doesn’t contain harsh chemicals, you can do so with just a few ingredients. Simply mix half a cup of dishwashing soap with one cup of hot white vinegar. Pour the solution into a spray bottle and you are ready to clean. Although this solution is fine for most materials, it should not be used on natural stone as the acidity of the vinegar can cause damage over time.

2. Spray the Tiles

Once you have the cleaning solution you are going to use, simply spray down the tiles and let the solution sit for about 10 minutes or so. This will allow the cleaning solution to penetrate any grime and dirt and help break it down.

3. Clean the Tile

Once the cleaning solution has been set, take a small sponge or brush and begin to scrub the tiles. This will take a little bit of elbow grease to ensure it is scrubbed thoroughly. Make sure you scrub the tiles as well the grout in between.

4. Rinse with Water

After you have scrubbed the area, you will then need to rinse it well with warm water. You want to make sure you rinse the cleaner off completely to avoid any spots or staining. Also, rinsing completely ensures off dirt and grime and has been washed away as well.

For Stubborn Spots

While the above steps are normally enough for most cleanings, you may have a situation where you need a deeper cleaning. One thing you can use is a paste made from baking soda. To make this paste you simply use three parts baking soda to one part water. The consistency will be a thick paste-like substance. Simply place this paste on any stubborn stains and let sit. Then scrub and rinse off completely.

You can also use a steam cleaner. This is a good tool to use before you apply any cleaning solution as the heat from the steam will help loosen any dirt on the surface prior to cleaning.

You want to keep your bathroom a relaxing and spa-like space. Keeping your tile grime-free is important to this goal. Luckily this is easy to do if you just give it a little time and attention. If you would like more information on Newport Beach, CA bathroom remodeling to turn your space into a spa-like experience, call us today and set up a free consultation to discuss your remodeling needs.